Outdoor Grills
Accessories
Burners, Tubular
Center Support
Cleaners
Grate Scrapers
Grates, Top Grids
Ignition Systems
Knobs, Burner
Knobs, Pilot
Legs & Casters
Orifices / Jets
Pilot Runner Tubes
Radiants, Broiler
Regulators
Regulator Assembly
Runner Tubes, Pilot
Stainless hardware
Tank Connector, LP
Thermometers
Valve, Burner
Valve, Pilot
Water Tubs, Trays
All MagiCater and MagiKitch'n Parts featured Ship via UPS Ground*
*Please
Contact us for Expedited Shipping Options
1-877-386-7766
|
View Full Size Parts Diagram ›Commonly Ordered Replacement Parts for MagiCater Outdoor Grills by MagiKitch'n
For Model Series: LPG, LPAGA, AGA, NPG, CGL, etc. by Magikitch'n
Please contact us if you need assistance with any MagiCater© (outdoor) or MagiKitch'n© (indoor) replacement parts, accessories, or equipment.
Orders may be placed by phone or online shopping cart
|
| 1-877-386-7766 (toll-free) or 415-332-5840 |
Part Number
Referenced to Numbers
in Exploded Diagram Above (with exceptions) |
Description |
Price |
|
 Item#: DVMK-1A (Heavy Duty)
Free Shipping on DVMK-1A |
Grate, Top Grid, for 30" section, Heavy Duty, Chrome Stainless Steel
3/8" thick diameter bars on grid.
Recommended Top Grate. Best Value.
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
(two grids required for 60" grills)
|
$1,349.00 |
|
 Item#: DVMK-1 |
Grate, Top Grid, for 30" section, Standard Duty, Steel
3/16" thick diameter bars on grid.
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
(two grids required for 60" grills)
|
|
No Longer Available |
 Item#: DVMK-1A15 (Heavy Duty) |
Grate, Top Grid, for 15" section, Heavy Duty, Chrome Stainless Steel
3/8" thick diameter bars on grid.
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.-2
(two grids required for 30" grills)
Dimensions: Grid is 13.625" Wide with handle adding 5" and peg adding 3/4".
Front to rear: 23.375"
|
$457.00 |
|
 Item#: DVMK-2 |
Stainless Steel Radiant
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
|
$68.00 |
|
 Item#: DVMK-5 |
Main Tubular Burner
20K BTU's, Original Equipment flame pattern
27-1/8" Length
1-1/4" Diameter
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc. (For 1997 & newer models only. Contact us for assistance.)
|
$59.00 |
|
Item#: DVMK-5B |
Early Series Main Tubular Burner
20K BTU's, Original Equipment flame pattern
27-1/8" Length
1" Diameter
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc. (For 1996 & earlier models only. Contact us for assistance.)
|
$239.00 |
|
 Item#: DVMK-11 |
Runner Tube Pilot for Burners, Left Hand 60" Models
Left Hand Runner Tube Pilot For 60" LPG/AGA, etc.
For 60" Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
|
$142.00 |
|
 Item#: DVMK-12 |
Runner Tube Pilot for Burners, Right Hand 60" Models
Right Hand Runner Tube Pilot For 60" For LPG/AGA, etc.
For 60" Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
|
|
Call For Price |
Item#: DVMK-13 |
Flex Tubing, 12 inch segment, gas tube
Flex Tubing, 12 inch segment, gas tube.
For MagiCater Outdoor Grills by Magikitch'n.
|
$159.00 |
|
 Item#: DVMK-54 |
Runner Tube Pilot for Burners, 30" Models
Runner Tube Pilot For 30" For LPG/AGA, etc.
For 30" Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
|
$209.00 |
|
 Item#: DVMK-17 |
Main Burner Gas Valve
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
This valve uses knob # DVMK-27
Note: replacement orifice-short (propane) for this valve is also available, see part DVMK-80 |
$71.00 |
|
 Item#: DVMK-23 |
Runner Tube Pilot Gas Valve
Push to Turn valve that controls pilot lights/runner tubes.
(this part is labeled as #23 in Diagram)
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
|
$99.00 |
|
 Item#: DVMK-27 |
Knob, Valve (Main Burner Knob)
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
(this part is labeled as #27 in Diagram)
|
$39.00 |
|
 Item#: DVMK-24 |
Knob, Pilot Valve
LPG*/LP VE LPAGA* AGA* (Runner Tube Knob)
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
(this part is labeled as #24 in Diagram)
|
$19.00 |
|
 Item#: DVMK-15 |
Elbow Fitting 1/8 MPT
Brass elbow fitting
|
$45.00 |
Call to Order |
 Item#: DVMK-80 |
Orifice Short
Propane orifice for main burner valve, short type
(this part is labeled as #34 in Diagram)
|
$25.00 |
|
 Item#: DVMK-15-55 |
Orifice Long
Propane orifice, long type
For use where applicable.
|
$38.50 |
Call to Order |
 Item#: DVMK-7 |
Runner Tube Bracket
Runner tube bracket for MagiCater Outdoor Grills, sold individually.
Please Note: 5 brackets are used on 60" models, and 3 brackets are used on 30" models.
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
|
|
No Longer Available |
 Item#: DVMK-8 |
Runner Tube Cover for 30" models*(or Early 60" models)
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
*Note: also fits earlier 60" models
|
|
No Longer Available |
| Item#: DVMK-8A |
Runner Tube Cover for 60" models
Runner tube cover with clip for 60" units
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
|
|
No Longer Available |
 Item#: DVMK-9 |
Water Tub, Under Tray (Aluminized), Side Pull
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
|
N/A |
|
Item#: DVMK-9B
|
*Water Tub, Under Tray (Stainless Steel), Side Pull
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
|
N/A |
|
 Item#: DVMK-9L |
Left Hand Water Tub, Under Tray (Stainless Steel), Front Pull
For Models WITH FRONT PULL TUBS: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
|
$379.00 |
Call to Order |
 Item#: DVMK-9R |
Right Hand Water Tub, Under Tray (Stainless Steel), Front Pull
For Models WITH FRONT PULL TUBS: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
|
$379.00 |
Call to Order |
 Item#: DVMK-25 |
Leg Assembly, with Casters (set of four)
For Models/Series: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, CG, CGL, etc.
Please Note: This is a Set of 4 Legs, with Casters
|
$1,678.00 |
|
 Item#: DVMK-25-1 |
Single Leg Assembly, with Caster
(one leg only with caster)
For Models/Series: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, CG, CGL, etc.
|
N/A |
|
 Item#: DVMK-28 |
Center Support, for MagiCater 60" models
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
|
$207.00 |
|
Item#: DVMK-PIEZO3 |
Piezo-Electric Spark Ignition System replacement kit
for 30" models LPG, LPAGA, AGA, NPG, etc.
Includes: Piezo Button, wire, brackets, tubing, spark tip
*No image available at this time
|
$337.00 |
|
Item#: DVMK-PIEZO6 |
Piezo-Electric Spark Ignition System replacement kit, for 60" models
for 60" models LPG, LPAGA, AGA, NPG, etc.
Includes: Piezo Button, wire, brackets, tubing, spark tip
|
$494.00 |
|
 Item#: DVMK-41 |
LP Tank Connector
(Connector, LP Tank Green)
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, MCSS, etc.
|
N/A |
|
 Item#: DVMK-39* |
Regulator on Tank with Hose Assembly
Regulator on tank assembly, LP only.
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, MCSS, etc.
*This assembly Includes parts from diagram labeled: 45, 41, 29, 22
**This assembly Includes part # DVMK-22
***This part is shown as #39 in diagram (#45 in earlier versions of parts diagram)
Genuine Magikitch'n - MagiCater part (OEM)
|
$339.00 |
|
 Item#: DVMK-39B |
Regulator on Tank with Hose Assembly
Regulator on tank assembly, LP only.
For Models (where applicable): LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, MCSS, etc.
|
|
Call to Order |
 Item#: DVMK-22 |
Two-Stage Regulator only (regulator at Tank)
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, MCSS, etc.
Note: this part is only available as a regulator assembly
|
N/A |
|
 Item#: DVMK-46 |
Regulator on Appliance
LP OR, LP, 3/8
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, MCSS, etc.
|
$179.00 |
|
 Item#: DVMK-OVCC |
Replacement Thermometer, Circular. Fits older models. (Mounts in hood. Previously this part was #DVMK-CCTM.)
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
|
N/A |
|
 Item#: DVMK-OVTM |
Replacement Thermometer, Oval. Fits current/recent models (Mounts in hood)
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
Includes mounting hardware.
|
$139.00 |
|
 Item#: DVMK-3 |
Set of hardware fasteners, 16 Stainless Steel Bolts and Nuts
Full set for 60" grills by MagiCater
(Fits LPAGA-60 & Other Models)
For Models: LPG, LPG-SS, AGA, LPAGA, LPAGA-SS, NPG, NPG-SS, MCSS, etc.
|
$54.00 |
|
| MagiCater Grill Accessories |
Item#: DVMK-30VNYL |
Exterior Cover for 30" Hooded Grill by MagiCater
30" Outdoor vinyl cover*
Protect your investment with a great looking vinyl cover
Gas Series/Charcoal Series
*Vinyl Cover is designed for units with optional hoods installed |
$399.00 |
|
Item#: DVMK-60VNYL |
Exterior Cover for 60" Hooded Grill by MagiCater
60" Outdoor vinyl cover*
Protect your investment with a great looking vinyl cover
Gas Series/Charcoal Series
*Vinyl Cover is designed for units with optional hoods installed
Note: image shows 30" Grill Cover
|
$529.00 |
|
Item#: DVMK-15MGRD |
MagiGriddle 15"w x 17.5"d
Convert your grill into a griddle for eggs or pancakes or use to saute vegetables or meat (1/4" gauge)
Gas Series/Charcoal Series
(Discount available on this item if purchased with a new MagiCater Grill)
Note: image below shows 30" MagiGriddle in use |
|
Call For Price |
*PLEASE NOTE: MagiGriddles style Griddle has been discontinued, please contact us for current design of Add On Griddles for MagiCater BBQ's (not shown)
Item#: DVMK-30MGRD |
MagiGriddle 30"w x 17.5"d
Convert your grill into a griddle for eggs or pancakes or use to saute vegetables or meat (1/4" gauge)
Gas Series/Charcoal Series
(Discount available on this item if purchased with a new MagiCater Grill)
Note: image at left shows 15" MagiGriddle
Note: image below shows 30" MagiGriddle in use |
|
Please Call/See Notice |
 Item#: DVMK-00SSRP |
Scraper, Round, Regular Duty Grids, Universal for Magicater grills
Custom made scraper to fit the shape of the top grate grids on MagiCater Outdoor Grills keeps your grids up to peak performance levels. (Discount available on this item if purchased with a new MagiCater Grill).
NOTE: it is dual sided so it works on free-floating rods on heavy duty grids or for standard top grids
|
$79.50 |
|
Item#: DVOR-3711
|
Carbon Cure™, Non-Caustic metal cleaner, removes carbon and grease
32 ounce bottle with foaming head dispenser
Non-Caustic Formula is Available for shipping to California and all 50 states.
See more information and demonstration video for this cleaning product here »
Please Call 1-877-386-7766 for assistance |
$44.00 |
|
| View Exploded Parts Diagram [click here] [PDF version] |
 
Orders may be placed by phone or online shopping cart
Please
Call us for MagiKitch'n Replacement Parts not shown on our website 1-877-386-7766 |
|
|
