Lighting Options:

Halogen Lights
(H models - see left)—standard in most models. 50-watt halogen lights come with a dual switch for dimming to 25 watts.
Bulbs are included.
For hoods 24" to 41" wide, two lights;
42" to 53" wide, three lights;
54" to 66" wide, four lights.
Each island hood has four halogen lights—two at each end.

• Stainless steel
• Standard powder-coat smooth finishes almond, biscuit, satin black or white. Also available in special colors; ask for the Vent-A-Hood custom color chart.
• Textured powder-coat finishes black river, copper vein, emerald vein, gold vein, silver vein, silvertone or white river.
• Metal overlay real brass or real copper. Powder-coat interior standard. Stainless steel interior available upon request.

Lighting Options:

Halogen lights
(H models - see right) standard in most models. 50-watt halogen lights come with a dual switch for dimming to 25 watts. Bulbs included. For hoods 24" to 41" wide, two lights; 42" to 53" wide, three lights; 54" to 66" wide, four lights. Each island hood has four halogen lights one in each corner.

Warming light bar
(WBAR model - see above) available in most 18" tall and taller wall-mount hoods. Light bar housing is made of stainless steel in all hoods. Bulbs not included. Not available in Island or Euro-style hoods.

Warming light housing (WL-1 - see left) available in most under-cabinet models. Light housing is made of stainless steel in all hoods. Bulbs not included. Not available in Island or Euro-style hoods.

Pot Racks

5/8" diameter brass or chrome rails add a beautiful effect on any style hood. Specify pot rail for front and/or sides on under cabinet and wall mount hoods. Specify pot rail for front and/or back, sides, or all around for island hoods.

Decorative Bands

Vertical bands (see right) 1"or 2" 18-gauge vertical bands. Bands are laminated to the hood and may not be attached with rivet caps or hex nuts.

1" or 2" 24-gauge vertical bands are also available; these bands are attached to hood with either rivet caps or hex nuts.

1/4" thick copper vertical bands. (See left) Only attached to hood using rivets.

Lip Treatment

a band of any of the enamel finishes or metals can also be attached to the front of the lip. 18 gauge lip treatment (see left) with full-lip coverage. Lip treatment is laminated to the hood, and may not be attached with rivet caps or hex nuts. May be used in conjunction with pot rail.

24-gauge lip treatment (see right) partially reveals the lip around the beveled edges. Attached to hood with either rivet caps or hex nuts. Cannot be used in conjunction with pot rail.