Dvorson's Food Service Equipment, Inc.
Dvorson's Food Service Equipment, Inc.
480 Gate Five Road - Suite #115
Sausalito, CA 94965
Phone (415) 332-5840
Toll Free (877) 386-7766
Fax (415) 332-2891
sales@dvorsons.com
Place Order Search Commercial Residential Refrigeration Appliances Cookware Equipment Cafe About Dvorson's
Wolf Range Cooking Equipment Replacement Parts
Wolf Range Cooking Equipment

View Shopping Cart
Click here to view all common Parts by category ›

Search Results For:  " challenger "
  Part Number   143 results found
Air Shutter, Burner/Mixer Plate

Dimensions: 2-5/8" outside diameter
• For Wolf model SCB (Vulcan VCCB)
• For Wolf griddles
• For Wolf ovens and ranges Commander model series F, FS, XF, XS
• For Wolf ovens and ranges Challenger model series CH, CHSS, KCH, KCHSS,R
For Wolf ovens and ranges in Challenger XL series (modular series and pre-modular series XL).
DVOR-1420

$6.78


Add to cart
Air Shutter, Burner/Mixer Plate


View Details
Bezel adapter kit for Wolf Range Challenger thermostats

Bezel adapter kit - Wolf Range Challenger series thermostats
FOR WOLF CHALLENGER SERIES RANGES (WHERE APPLICABLE)
DVOR-1529

$29.50


Add to cart
Bezel adapter kit for Wolf Range Challenger thermostats


View Details
Blower Motor, for Commander Snorkler Ovens, Challenger Snorkler Ovens (Convection Oven)

For Commander Snorkler models & Challenger Convection ("Snorkler") models.
Compatible with all Snorkler© Convection models in Wolf Commander or Wolf Challenger Series
115 Volt, 1/4 hp, 1725 rpm
Uses blower fan wheel DVOR-1106
DVOR-1107

$459.00


Add to cart
Blower Motor, for Commander Snorkler Ovens, Challenger Snorkler Ovens (Convection Oven)


View Details
Blower Wheel

For Commander Snorkler series and 29" Challenger Snorkler series
8" OD with 1/2" bore
DVOR-1106

$109.00


Add to cart
Blower Wheel


View Details
Burner Assembly, Challenger, AHP, VCRH

Wolf Burner Assembly for late model Challenger ranges, AHP series Hot Plate(s), VCRH Hot Plates (Vulcan)
Dual burner assembly with flash tube pilot system
Includes all components shown: burners, burner cap, venturis, air shutters, etc.
DVOR-1465

$167.00


Add to cart
Burner Assembly, Challenger, AHP, VCRH


View Details
Burner Assembly, Open Top (*NLA)

Discontinued - NO LONGER AVAILABLE 11/16/16
Replacement Burner Assembly for Wolf Range Challegner CH, CHSS.
19.5" Long Overall
Includes two cast iron venturis, burner heads, burner gaskets, and air shutters
Please contact us for availability and lead-time on this part 1-877-386-7766 or 415-332-5840
DVOR-1476



Burner Assembly, Open Top (*NLA)


View Details
Burner Assembly, Open Top (Aluminized Steel Venturis)

Replacement Burner Assembly, open top. For Wolf Range Challenger models CH/CHSS, etc. (where applicable)
Includes Aluminized Steel venturis shown (also available separately, see parts DVOR-9104, DVOR-9105).
19-3/8" Overall Length (approximately)
DVOR-1486

$248.44


Add to cart
Burner Assembly, Open Top (Aluminized Steel  Venturis)


View Details
Burner Assembly, Open Top (Early Model Commander or Challenger)

*Out of Stock - Not Available/Discontinued

Includes assembly with two burner heads and air shutters.
For Wolf model series F, FS, XF, XFS (before 1990)

Please contact us for assistance: 1-877-386-7766

Used on Wolf Hot Plates and Wolf Ranges from pre 90's era Wolf Cooking Equipment, freestanding and customized kitchen suites
DVOR-1467*



Not Available
Burner Assembly, Open Top (Early Model Commander or Challenger)


View Details
Burner Head for A, AE, AK, CH, CHSS

Replacement burner head for Wolf Gourmet (residential), etc. (Also fits certain Challenger models).
For series: A, AE, AK, Challenger CH, Challenger CHSS
**Pilot holes are on center.
Please contact us for assistance 1-877-386-7766
DVOR-4277

$87.44


Add to cart
Burner Head for A, AE, AK, CH, CHSS


View Details
Burner Head for CH, CHSS

Replacement burner head for Wolf Range Challenger CH, CHSS.
Cast iron.
Pilot holes are off center to left
DVOR-4214

$101.50


Add to cart
Burner Head for CH, CHSS


View Details
Burner Head Gasket

Width: 2-5/8"
Diameter of Center hole is approximately 1"

For Wolf ovens and ranges Challenger model series:
CH, CHSS, KCH, KCHSS, CHR
Also compatible with other Wolf Range Co. models. For Wolf model series F, FS, CH, CHSS, KCH, KCHSS, A, AE, AK, R, VH, HP.


*Now available in pack of 6, click here.
DVOR-1472

$9.75


Add to cart
Burner Head Gasket


View Details
Burner Head Gaskets - Pack of 6

Pack of 6 gaskets (part # DVOR-1472) Width: 2-5/8"
Diameter of Center hole is approximately 1"


For Wolf ovens and ranges Challenger model series:
CH, CHSS, KCH, KCHSS, CHR, etc.
Also compatible with other Wolf Range Co. models.
DVOR-1472-6

$47.50


Add to Cart
Burner Head Gaskets - Pack of 6


View Details
Burner Head with six slots, for Challenger etc.

Replacement cast iron burner head for Wolf Challenger (R series Challenger Commercial), etc.
Has six slots
4-3/4" Outside Diameter (1-3/8" inner diameter hole on center)
DVOR-1407

$51.25


Add to cart
Burner Head with six slots, for Challenger etc.


View Details
Burner Head, Cast Iron

Cast iron burner head
Outer Diameter: 4-11/16" (4.68")
Used on older Wolf Challenger Ranges (made 1992 and later)
Vulcan Range MG series ranges, and 24L, 36L, 36LC, 48L, 60L, 60LC, 60LCC, 14L, 148LC, 160L, 160LC, 260L, 260LC, 260LCC, 481L, 481LC, MG-12, etc.
DVOR-1405

$89.00


Add to Cart
Burner Head, Cast Iron


View Details
Burner Valve (for SCB Char Broilers, Wolf Griddles, etc.)

For Wolf broilers and cheese melters models SCB (except F, FS), Vulcan VCCB models, where applicable.

For Wolf griddle models GG, HG, MTG, Hi-Boy Pro, RMG, STG, Short Order Griddles, and older Teppanyaki griddles in TYG series. Also used on Challenger Ranges (CH/CHSS/CHR), and Wolf Hot Plate countertop Ranges where applicable (Regency Hot Plate RHP models).

DVOR-1421

$44.00


Add to cart
Burner Valve (for SCB Char Broilers, Wolf Griddles, etc.)


View Details
Burner, IR, for Griddles etc., Commander, IRG series, Challenger by Wolf

Burner, Infrared (IR), for Griddles etc., Commander, IRG series, Challenger by Wolf
Dimensions: Length 20-9/16" x 6-3/4" Width
DVOR-1848

$619.00


Please Call to Order 1-877-386-7766
Burner, IR, for Griddles etc., Commander, IRG series, Challenger by Wolf


View Details
Burner, Oven (Challenger CH, CHSS, KCH, KCHSS)

Wolf ovens and ranges Challenger model series CH, CHSS, KCH, KCHSS, XCH, etc.
Dimensions (including bracing): 17-3/4" x 5" (12-3/4" burn).

DVOR-1423

$159.00


Add to cart
Burner, Oven (Challenger CH, CHSS, KCH, KCHSS)


View Details
Burner, tubular, for Wolf CHR series Fry Top sections

Burner, tubular, for Wolf CHR series Fry Top sections
No image available at this time.
DVOR-4880

$224.00


Please Call to Order
Burner, tubular, for Wolf CHR series Fry Top sections


View Details
Caster Set, stem type (set of four locking casters)

Set of Casters for Wolf Challenger Ranges
Set of four locking casters.
5/8" Threads pipe stem casters
All four casters in set have locking mechanism.
DVOR901-0000

$120.00


Add to cart
Caster Set, stem type (set of four locking casters)


View Details
Caster Set, stem type (set of six locking casters)

Set of casters for Wolf Challenger Ranges
Set of six casters.
5/8" Threads pipe stem casters
All six casters in set have locking mechanism.
DVOR902-0000

$180.00


Add to cart
Caster Set, stem type (set of six locking casters)


View Details
Caster Sets, large stem, set of four (Wolf Challenger pre 1992)

CASTER SETS for Wolf Challenger Ranges
For earlier models made before 1992
Set of four (4) casters.
1-1/4" Male Pipe Stem Threads**

**Please Note: actual overall diameter measurement of threaded stem is 1-9/16"
DVOR-9024

$180.00


Add to cart
Caster Sets, large stem, set of four (Wolf Challenger pre 1992)


View Details
Caster Sets, large stem, set of six (Wolf Challenger pre 1992)

CASTER SETS for Wolf Challenger Ranges, early series
For earlier models made before 1992
Set of six (6) casters.
1-1/4" Male Pipe Stem Threads**

**Please Note: actual overall diameter measurement of threaded stem is 1-9/16"
DVOR-9026

$240.00


Add to cart
Caster Sets, large stem, set of six (Wolf Challenger pre 1992)


View Details
Casters for Challenger XL Ranges, W-Series, V-Series (set of 6)

CASTER SETS for Wolf Challenger XL Ranges, W-Series, V-Series (Vulcan V-Series Ranges)

3-1/2" x 3-1/2" plate
2-5/8" x 2-5/8" and 2-7/8" x 1-3/4" hole centers
With brake
Set of six
$180.00

DVOR9006

$180.00


Add to cart
Casters for Challenger XL Ranges, W-Series, V-Series (set of 6)


View Details
Casters for Challenger XL, W-Series, V-Series (Vulcan V-Series), Ranges (set of 4)

CASTER SETS for Wolf Challenger XL Ranges, W-Series, V-Series (Vulcan V-Series)

3 1/2" x 3 1/2" plate
2 5/8" x 2 5/8" and 2 7/8" x 1 3/4" hole centers
With brake
Set of four
$120.00
DVOR9004

$120.00


Add to cart
Casters for Challenger XL, W-Series, V-Series (Vulcan V-Series),  Ranges (set of 4)


View Details
Challenger Convection Oven Rack (CH-18)

Challenger Convection Oven Rack (CH-18).
DVOR714297

$159.00


Add to cart
Challenger Convection Oven Rack (CH-18)


View Details
Challenger Oven Racks (CH-29, Convection)

Challenger convection oven rack
28-1/16" x 19-1/4"

DVOR714373

$189.00


Add to cart
Challenger Oven Racks (CH-29, Convection)


View Details
Challenger Standard Oven Rack (CH-18)

Challenger Standard Oven Rack
DVOR714476

$139.00


Add to cart
Challenger Standard Oven Rack (CH-18)


View Details
Challenger Standard Oven Rack (CH-29), Special Order Only

Challenger Standard Oven Rack (CH-29).
Challenger standard oven rack
20-3/4" x 28-5/16"

Availability: Currently available by special order only, please contact us for lead-time.
DVOR714478

$199.00


Add to cart
Challenger Standard Oven Rack (CH-29), Special Order Only


View Details
Coil for Old-Style Solenoid Valve (Limited Availability)

Coil only for Old Style single solenoid valve, 120V, 10 Amp (old-style solenoid body is no longer available)
Wolf Challenger Ranges, Griddles, etc. (where applicable)
DVOR-1883

$68.00


Order Now
Coil for Old-Style Solenoid Valve (Limited Availability)


View Details
Custom Oven Racks

Please provide the measurements and specifications asked for in the Custom Oven Rack PDF form, click here.

Fax the form back to us (FAX # 415-332-2891), or use our Quote Request Form to submit the measurements and specifications for your Custom Oven Racks.

Please contact us if you need assistance. 1-877-386-7766
DVOR-WARD

$ Fax or Call for price


Custom Oven Racks


View Details
Dial (knob) for Challenger XL C-series oven

Dial (knob) for Challenger XL C-series oven
Used with thermostat DVOR-5100
DVOR-3861

$54.50


Add to Cart
Dial (knob) for Challenger XL C-series oven


View Details
Dial for Thermostat on Griddles, Challenger XL series (late models)

Dial for Thermostat on Griddles/Griddle Sections, Challenger XL series (late models)
Black with octagonal grip (KX style)
For C series current model Challenger XL
*Image may not exactly resemble your part
DVOR-1686

$29.00


Please Call to Order or Use Order Form
Dial for Thermostat on Griddles, Challenger XL series (late models)


View Details
Door Handle Bracket (Left)

Wolf Challenger and Commander Models.
DVOR-1921

$129.00


Add to cart
Door Handle Bracket (Left)


View Details
Door Handle Bracket (right)

Wolf Challenger and Commander models.
DVOR-1922

$129.00


Add to cart
Door Handle Bracket (right)


View Details
Door Handle Bracket, Challenger XL modular (left or right side)

Door Handle Bracket, Challenger XL modular (left or right side)
DVOR-9229

$59.75


Call to Order
Door Handle Bracket, Challenger XL modular (left or right side)


View Details
Door Handle Tube, 18"

Wolf Range Challenger Door handle tube, 18".
DVOR714253

$146.60


Add to cart
Door Handle Tube, 18


View Details
Door Handle Tube, 29"

Wolf Range Challenger Door handle tube, 29".
DVOR714254

$86.80


Add to cart
Door Handle Tube, 29


View Details
Door Hinge Assembly Block, Challenger XL (left or right side)

Door hinge assembly block for Wolf Challenger XL or Vulcan Endurance Series commercial ranges
Dimensions: 4-5/8" long
Note: This is a recommended replacement part when replacing the door hinges (see DVOR-1963, DVOR-1964).
DVOR-1920

$22.20


Add to cart
Door Hinge Assembly Block, Challenger XL (left or right side)


View Details
Door Spring Hinge Assembly for Challenger XL, W series, V Series, Left Side

Left door hinge spring assembly for Wolf Challenger XL series ranges (and Vulcan Endurance series), etc.

Also fits models: W series, or V series by Vulcan (W24, W36, W60, W60F, W260, V24, V36, V60, V60F, V260.)

Note: additional recommended part when replacing this hinge is DVOR-1920 (door hinge stop)
DVOR-1963

$75.60


Add to Cart
Door Spring Hinge Assembly for Challenger XL, W series, V Series, Left Side


View Details
Door Spring Hinge Assembly for Challenger XL, W series, V Series, Right Side

Right side door hinge spring assembly for Wolf Challenger XL series ranges (and Vulcan Endurance series), etc.

Also fits models: W series, or V series by Vulcan (W24, W36, W60, W60F, W260, V24, V36, V60, V60F, V260.)



Note: additional recommended part when replacing this hinge is DVOR-1920 (door hinge stop)
DVOR-1964

$75.60


Add to Cart
Door Spring Hinge Assembly for Challenger XL, W series, V Series, Right Side


View Details
Double Pilot Assembly four Four burners (flash tube models)

Double Pilot Assembly four Four burners (flash tube models)
pilot tube assembly for four open top burners
DVOR-1548

$248.20


Please Call to Order or Use Order Form
Double Pilot Assembly four Four burners (flash tube models)


View Details
Flame Switch, Sensor, 30 inch capillary, Wolf commercial and early Wolf Gourmet

For Wolf Range Commander models/series: KF-4J-27, KFS-4J-27, KF, KFS, VS12, VS18, VS24, VS36, and more. Challenger series when applicable.

Also used with some Wolf Gourmet A series (residential models), etc.

30" capillary, two prong, includes mounting screws.
Note: Also for use with Vulcan models.
DVOR-1821

$389.00


Add to cart
Flame Switch, Sensor, 30 inch capillary, Wolf commercial and early Wolf Gourmet


View Details
Front Burner Assembly, Single, Challenger series (6-slotted burner style)

Single Burner assembly for Challenger Series
Six slotted burner head style
Includes Air Shutter

(rear burner assembly is part # DVOR-3606)
DVOR-8023

$162.00


Add to Cart
Front Burner Assembly, Single, Challenger series (6-slotted burner style)


View Details
Front Venturi, Challenger, 7.5 inch length

Steel front venturi, early series challenger ranges with Flash tube dual burner assemblies (see 1475, 1486)
Length: 7-1/2" (approximately)
Please contact us for assistance.
DVOR-9104

$144.00


Add to cart
Front Venturi, Challenger, 7.5 inch length


View Details
Gas Pressure Regulators (LP Gas, 1-1/4 NPT)

Gas Pressure Regulator for Liquid Propane gas equipment.
For very early series Challenger models.
1-1/4" NPT
5" to 12" water column range
Straight thru flow, non-lockup design regulator.
DVOR-1621

$143.88


Add to cart
Gas Pressure Regulators (LP Gas, 1-1/4 NPT)


View Details
Gas Pressure Regulators (Natural Gas, 1-1/4 inch NPT)

Gas Pressure Regulator for Natural Gas.
For very early series Challenger models.
1-1/4" NPT
3" to 6" water column range
Straight thru flow, non-lockup design regulator.
DVOR-1620

$143.88


Add to cart
Gas Pressure Regulators (Natural Gas, 1-1/4 inch NPT)


View Details
Gasket for Oven Door, 30 and 36 inch ranges, commercial Vulcan

Replacement gasket for oven doors on 30" or 36" models by Vulcan in Series: L, LC, LCC, EG, HE, HEG, etc. where applicable
DVOR-3560

$182.58


Please Call to Order or Use Order Form
Gasket for Oven Door, 30 and 36 inch ranges, commercial Vulcan


View Details
Grate, Burner (front or rear single burner grate)

Cast Iron Grate
Dimensions: 11-1/8" X 12-3/4"
Wolf Challenger range model series C23, CH, CHR, C34, C45, C56, C68
DVOR-1385

$225.00


Add to cart
Grate, Burner (front or rear single burner grate)


View Details
Grate, Spider Grate (9.5" OD)

Cast Iron Porcelainized grate.

For Wolf ranges Challenger model series CH, CHR, CHSS, C23, KCH, KCHSS (with round "spider" grate).

Also Fits some Wolf Gourmet Residential Series models starting with the letter "A" (with round "spider" grate).
A Completely Different type of Spider Grate
DVOR-1352

$49.50


Add to cart
Grate, Spider Grate (9.5


View Details
Grate, Spider Grate (OEM version)

OEM version Spider Grate
For Wolf series CH, CHR, CHSS, C23, KCH, KCHSS.
Wolf Gourmet A series (Residential).
Dimensions: 9-1/2"
A Completely Different type of Spider Grate
DVOR-14377P

$230.00


Add to cart
Grate, Spider Grate (OEM version)


View Details
Head, Burner

Wolf ovens and ranges Challenger model series CH, CHR, CHSS, C23, KCH, KCHSS
4-1/4" Diameter
Cast Iron
Pilot Holes on Center
DVOR-1477

$87.44


Add to cart
Head, Burner


View Details
Heat Deflector Shield (for Tubular Burner on SCB Charbroilers)

Heat Deflector Shield for tubular burner. Wolf Range equipment.
Dimensions: 16-1/2" x 4-3/8"
For Wolf SCB or VCCB. Natural Gas models. (Contact us if your model is Propane/LP Gas. 1-877-386-7766).
DVOR-1462

$36.00


Add to cart
Heat Deflector Shield (for Tubular Burner on SCB Charbroilers)


View Details
Igniter for Oven Burner, Wolf Range Commercial

Compatible with commercial Wolf Challenger ovens and ranges model series KCH, KCHSS, CH, CHSS, KF, KFS, KFXP, KFXPS, XCH, XFS, AFS, CAF, KAFS, KCAF.
DVOR-1800

$119.00


Add to cart
Igniter for Oven Burner, Wolf Range Commercial


View Details
Igniter Knob for igniters on Wolf Challenger XL C36SFF models

Igniter Knob for igniters on Wolf Challenger XL C36SFF models
Wolf/Vulcan Delta Knob
DVOR-1587

$14.10


Add to Cart
Igniter Knob for igniters on Wolf Challenger XL C36SFF models


View Details
Igniter with Pilot for Challenger and Commander KCH (R), KF, KFS, FK ovens, Wolf Gourmet A series

Oven Pilot Igniter assembly
Natural or LP gas (orifice not included, please contact us if needed 1-877-386-7766)

Pilot burner with igniter and 42" lead and 1/8" female push-on, 1/4" cct nut and sleeve

For Wolf Range Commander and Challeger OVENS in Series: FK, KCH, KF, KFS, KCH (R), etc.
Wolf Gourmet residential A, AS series range ovens where applicable
Also compatible with models (Vulcan): VS12, VS18, VS24, VS36, etc.
DVOR-1808

$118.70


Add to Cart
Igniter with Pilot for Challenger and Commander KCH (R), KF, KFS, FK ovens, Wolf Gourmet A series


View Details
Insert & Foot

For Wolf model SCB or VCCB, etc.
For Wolf griddle models Hi Boy TG, IRG, MTG, Pro TG, Regency series

Fits 1-1/4" pipe, with 1-1/4 to 2-3/8" of height adjustment
DVOR-1007

$14.00


Add to cart
Insert & Foot


View Details
Knob (A), for Wolf Challenger Ranges, Broilers, etc. (Red) - NOT AVAILABLE

Knob A: NO LONGER AVAILABLE at this time - Replaced with Knob M by Wolf (darker red color).

See Knob M

(See DVOR-1549 for Black Knob, or KNOB "E" , or in red KNOB D)

Recommended Replacement is Knob M.
DVOR999-KNBA



No Longer Available (NLA). See Knob M.
Knob (A), for Wolf Challenger Ranges, Broilers, etc. (Red) - NOT AVAILABLE


View Details
Knob (M), for Wolf Challenger Ranges, Broilers, etc. (Dark Red)

Knob M

Replacement top burner knob with set screw on left. Dark-Red color, with Wolf logo.
NOTE: Light-Red (Knob A) color knob with Wolf logo has been replaced by Wolf® with Dark-Red color (Knob M)

Fits WOLF RANGE Challenger Series CH, CHSS, F, FB, FK, FM, FS, FV, GMO, KF, KFS
WOLF BROILER Series CCB, FCB, SCB (including F and FS Commander models)

Wolf Salamander Broilers: IRB series, RB series
TYG series Teppanyaki Griddles (grills)
DVOR-KNBM

$22.00


Add to Cart
Knob (M), for Wolf Challenger Ranges, Broilers, etc. (Dark Red)


View Details
Knob D, for Wolf Range Cooking Equipment, Red (maroon)

Replacement knob for Wolf Range Challenger and Commander series commercial cooking equipment.
Color is Maroon Red
Set Screw on Knob. Flat Down.
No logo on knob.
Outside Diameter: 2.50"
DVOR999-KNBD

$9.00


Add to cart
Knob D, for Wolf Range Cooking Equipment, Red (maroon)


View Details
Knob E, for Wolf Range Cooking Equipment, Black

Replacement knob for Wolf Range Challenger and Commander series commercial cooking equipment, etc.
Color is Black
Set Screw on Knob. Flat Down.
No logo on knob.
DVOR999-KNBE

$9.00


Add to cart
Knob E, for Wolf Range Cooking Equipment, Black


View Details
Knob for top burner on Wolf Challenger XL (non-modular), Red

Knob for Wolf Challenger XL non-modular series
No image available at this time
Red, thermal plastic, with set screw
DVOR-5121

$35.14


Please Call to Order or Use Order Form
Knob for top burner on Wolf Challenger XL (non-modular), Red


View Details
Knob for top burner on Wolf Challenger XL, Vulcan Endurance, G series, etc.

Replacement top burner knob with set screw for Wolf Range Challenger XL (modular), Vulcan Hart Endurance, G series, etc.
Fits Challenger C series (late models), and other Wolf Range cooking Equipment including AHP Hot Plate, VHP (Vulcan), etc.
Can be mounted with D stem Flat Up or Flat Down
Color is black.
DVOR-3515

$19.95


Add to cart
Knob for top burner on Wolf Challenger XL, Vulcan Endurance, G series, etc.


View Details
Knob for top burners Wolf Challenger XL C36SFF models

Knob for top burners Wolf Challenger XL C36SFF models
DVOR-1586

$23.30


Add to Cart
Knob for top burners Wolf Challenger XL C36SFF models


View Details
Knob, Burner knob for Wolf Range commercial

Replacement top burner knob with set screw on left, and "W" logo on knob. Color of knob is black.

Fits WOLF RANGE Challenger and Commander Series CH, CHSS, F, FB, FK, FM, FS, FV, GMO, KF, KFS
WOLF BROILER Series CCB, FCB, SCB (including F & FS Commander models)

Also fits Wolf Salamander Broilers: IRB series, RB series
DVOR-1549

$39.00


Add to Cart
Knob, Burner knob for Wolf Range commercial


View Details
Knob, for Gas shut off valve (ovens)

Oven Shut Off Valve for Wolf Range Cooking Equipment (commercial and residential series shut off valve knob/dial)

Dark maroon red with Wolf "W" logo and set screw

Please Note: Old style of this knob with s-shape has been discontinued and is no longer available (see second image shown for reference to the old discontinued style of this knob by Wolf Range)
DVOR-1354

$24.00


Add to Cart
Knob, for Gas shut off valve (ovens)


View Details
Leg, 6" for Wolf Range Cooking Equipment (Vulcan), Challenger XL, V, VG, W, etc.

Leg for Wolf Range Cooking Equipment (Vulcan), Challenger XL, V, VG, W, etc.
6" height with plate mount
Fits Wolf models including: C24S, C36C, C36S, C60, C72, W24, W260, W36, W36F, W60, W60F
Fits Vulcan models including: E12FP, E12HT, E24L, E36L, E48L, E60L, EG160, EG24, EG260, EG36, EG60, EV12, EV24S, EV36S, EV60SS, G24S, G260, G260C, G260CC, G36, G36C, G36F, G36S, G36X, G48, G48F, G60, G60C, G60CC, G60F, G60FC, G60FCC, G60LC, G60X, G60XC, G60XCC, G72, HE12, HE36, HGB34, HGB34M, HGB50, HGB50M, HGB60, HGB60M, HGB71, HGB71M, MG12, V24, V260, V36, V36F, V60, V60F, VG24, VG260, VG36, VG60, LG300, LG400, LG500, 148L, 148LC, 160L, 160LC, 24 GRIDDLE, 24L, 24S, 260L, 260LC, 260LCC, 36 GRIDDLE, 36C, 36C-6B, 36L, 36LC, 36S, 36S-6B, 3GR45MF, 481L, 481LC, 48C, 48L, 48S, 48SS, 60, 60CS, 60L, 60LC, 60LCC, 60SC, 60SS, 72, 72CC, 72CS, 72SC, 72SS
DVOR-1099

$158.61


Add to Cart
Leg, 6


View Details
Low Profile Casters for Challenger XL, W-Series, V-Series (Vulcan V-Series), Ranges (set of 4)

Low Profile CASTER SETS for Wolf Challenger XL Ranges, W-Series, V-Series (Vulcan V-Series)
2" wheels With brake
Set of four
$120.00
DVOR9004LP

$120.00


Add to cart
Low Profile Casters for Challenger XL, W-Series, V-Series (Vulcan V-Series),  Ranges (set of 4)


View Details
Open Top Pilot Assembly* (four burner)

Four burner
3/16" tubing
Ovens & Ranges Commander Model Series F. FS, XF, XS, VS, etc.
Fits early Wolf Challenger 4 burner range configurations ONLY for one pilot per burner models.
Dimensions (also see diagram): 18-1/2" x 12-1/2" x 4-5/8" (approximately)

*NOTE: Shipped in separate parts. Requires assembly. Please contact us for assistance 1.877.386.7766
DVOR-1474

$89.00


Add to cart
Open Top Pilot Assembly* (four burner)


View Details
Open Top Plate with Notches

Currently Unavailable - Inventory Update Pending

Wolf Challenger Series. Porcelainized.
Also compatible with early A series (Wolf Gourmet/Residential)
Please Note: Notched top plate only fits models with notches in OEM part.
View measurements for open top plate (pdf) »
DVOR-1325

$ Pending


Limited Availability - Contact Us
Open Top Plate with Notches


View Details
Orifice Jets for Griddle valve, natural gas, 6 pack

Orifices for manual control non-thermostatic griddle burner valves on Challenger, Commander, etc., where applicable
Natural Gas
For use below 2000 feet elevation/altitude.
DVOR-9554

$36.00


Add to Cart
Orifice Jets for Griddle valve, natural gas, 6 pack


View Details
Orifice Jets for Hot Top valve, natural gas, 6 pack

Orifices for Hot Top Section burner valves on Challenger, Commander, etc., where applicable
Natural Gas
For use below 2000 feet elevation/altitude.
DVOR-9557

$35.75


Add to Cart
Orifice Jets for Hot Top valve, natural gas, 6 pack


View Details
Orifice Jets for top burner valve, natural gas, 6 pack

Orifices for top burner valves on Wolf Range Challenger, Commander, etc., where applicable
Natural Gas
For use below 2000 feet elevation/altitude.
DVOR-9546

$24.90


Add to Cart
Orifice Jets for top burner valve, natural gas, 6 pack


View Details
Orifice Jets for top burner valve, propane LP gas, 6 pack

Orifices for top burner valves on Challenger, Commander, etc., where applicable
Propane LP Gas
For use below 2000 feet elevation/altitude.
DVOR-9553

$36.25


Add to Cart
Orifice Jets for top burner valve, propane LP gas, 6 pack


View Details
Orifice Propane (LP), for DVOR-1535 pilot burner

Orifice Propane, for DVOR-1535 Challenger oven pilot burner
For use below 2000 ft. elevation
DVOR-3935

$19.00


Add to Cart
Orifice Propane (LP), for DVOR-1535 pilot burner


View Details
Oven Door Handle for Challenger XL modular (24" door)

Oven Door Handle for Challenger XL modular (24" door)
"Wolf" logo on center of handle.
DVOR-9224

$128.00


Call to Order
Oven Door Handle for Challenger XL modular (24


View Details
Oven Door Handle for Challenger XL modular (30" door)

Oven Door Handle for Challenger XL modular (30" door)
"Wolf" logo on center of handle.
DVOR-9230

$145.20


Call to Order
Oven Door Handle for Challenger XL modular (30


View Details
Oven Door Handle for Vulcan Endurance modular (24" door)

Oven Door Handle for Challenger XL modular (24" door)
"Vulcan" logo on center of handle.
DVOR-9224-2

$134.14


Call to Order
Oven Door Handle for Vulcan Endurance modular (24


View Details
Oven Door Handle for Vulcan Endurance modular (30" door)

Oven Door Handle for Challenger XL modular (30" door)
"Vulcan" logo on center of handle.
DVOR-9230-2

$145.20


Call to Order
Oven Door Handle for Vulcan Endurance modular (30


View Details
Oven Door Spring for Wolf Challenger Ranges etc.

Wolf ovens and ranges Challenger model series C, CH, CHR, CHSS, C23, KCH, KCHSS, etc.
Overall length is approximately 7"
Width is approximately 7/8"
DVOR-1961

$21.40


Add to Cart
Oven Door Spring for Wolf Challenger Ranges etc.


View Details
Oven Pilot Assembly, Natural gas or LP, 3/16 x 1/4

Replacement Oven Pilot Assembly for Wolf Commander and Challenger where applicable
Includes fittings/orifices for Natural and LP
Wolf Range and Vulcan Model commercial range ovens
Please call for assistance 1-877-386-7766
DVOR-4275

$51.20


Add to Cart
Oven Pilot Assembly, Natural gas or LP, 3/16 x 1/4


View Details
Oven Rack (CH-18) for Challenger series prior to 1989

For Challenger series prior to 1989, etc.
Width 17.75" , Depth 21.25"
DVOR-1218

$89.50


Add to cart
Oven Rack (CH-18) for Challenger series prior to 1989


View Details
Oven Rack (CH-29) for Challenger series prior to 1989

Oven Rack for Challenger series prior to 1989.
Width 29", Depth 21.37"
DVOR-1229

$119.00


Add to cart
Oven Rack (CH-29) for Challenger series prior to 1989


View Details
Oven Rack, Small rack for 60" Challenger XL models

Oven Rack, Small rack for 60" Challenger XL models
Uses rack guide # DVOR-GRSX
No image available at this time.
DVOR-8053

$149.00


Please Call to Order or Use Order Form
Oven Rack, Small rack for 60


View Details
Oven Thermostat, 48" capillary, Challenger XL

Replacement oven thermostat for Wolf and Vulcan Range Commercial units (late 90's to 2000's to present)
Wolf Ovens and Ranges in Challenger XL: C Series (Vulcan Endurance), 48" capillary.
Commercial BJ series thermostat.



View Thermostat Adjustment/Calibration Directions
View Oven Test Thermometers

Thermostat Installation Instructions (pdf)
DVOR-1565

$328.00


Add to cart
Oven Thermostat, 48


View Details
Pilot Assembly for 2 Center Open Burners on Challenger (CH, CHR, GMO, C23, C34, C45, C56, C68)

Pilot Assembly for 2 Center Open Burners on Challenger series ranges by Wolf Range
Compatible with series: CH, CHR, GMO, C23, C34, C45, C56, C68, etc.
Stainless steel pilot line tube and pilot head
For use with Challenger flash tube systems.
DVOR-9163

$97.38


Add to Cart
Pilot Assembly for 2 Center Open Burners on Challenger (CH, CHR, GMO, C23, C34, C45, C56, C68)


View Details
Pilot Assembly for 2 Left hand Open Burners on Challenger (CH, CHR, GMO, C23, C34, C45, C56, C68)

Pilot Assembly for 2 top Left hand Open Burners on Challenger series ranges by Wolf Range
Compatible with series: CH, CHR, GMO, C23, C34, C45, C56, C68, etc.
Stainless steel pilot line tube and pilot head
For use with Challenger flash tube systems.
DVOR-9162

$97.38


Add to Cart
Pilot Assembly for 2 Left hand Open Burners on Challenger (CH, CHR, GMO, C23, C34, C45, C56, C68)


View Details
Pilot Assembly for 2 right hand Open Burners on Challenger (CH, CHR, GMO, C23, C34, C45, C56, C68)

Pilot Assembly for 2 top right hand Open Burners on Challenger series ranges by Wolf Range
Compatible with series: CH, CHR, GMO, C23, C34, C45, C56, C68, etc.
Stainless steel pilot line tube and pilot head
For use with Challenger flash tube systems.
DVOR-9144

$134.60


Add to Cart
Pilot Assembly for 2 right hand Open Burners on Challenger (CH, CHR, GMO, C23, C34, C45, C56, C68)


View Details
Pilot assembly for Griddle Top Section, CH, KCH Challenger Series

Pilot assembly for Griddle Top Section, CH, KCH Challenger Series
No image available at this time. Please contact us for assistance 1.877.386.7766
DVOR-9170

$128.20


Please Call to Order or Use Order Form
Pilot assembly for Griddle Top Section, CH, KCH Challenger Series


View Details
Pilot Assembly Kit for 1 Hot Top/Fry Top Burner on Challenger (CH, CHR, GMO, C23, C34, C45, C56, C68)

Pilot Assembly Kit for Single Burner Hot Top/Fry Top Burner on Challenger (CH, CHR, GMO, C23, C34, C45, C56, C68)

Kit includes pilot head, tubing, and pilot valve (Stainless Steel tubing and head).
DVOR-9147

$128.95


Please Call to Order
Pilot Assembly Kit for 1 Hot Top/Fry Top Burner on Challenger (CH, CHR, GMO, C23, C34, C45, C56, C68)


View Details
Pilot Assembly Kit for 2 High-Low Broiler Burners on Challenger (CH, CHR, GMO, C23, C34, C45, C56, C68)

Pilot Assembly Kit for 2 High-Low Broiler Burners on Challenger (CH, CHR, GMO, C23, C34, C45, C56, C68)
Includes pilot valve
No image available at this time.
DVOR-9148

$178.82


Please Call to Order
Pilot Assembly Kit for 2 High-Low Broiler Burners on Challenger (CH, CHR, GMO, C23, C34, C45, C56, C68)


View Details
Pilot Assembly, Single (CH/CHSS)

Pilot assembly for Challenger CH or CHSS series
Single. 3/16 inch tubing diameter
DVOR-1492

$27.69


Add to Cart
Pilot Assembly, Single (CH/CHSS)


View Details
Pilot Assembly, Single (SCB, FCB, CCB)

Pilot assembly for SCB, FCB, CCB.
Also used on F, FS, CH, CHSS units with Char Broiler Grill sections (Commander and Challenger Series).
Length 5-1/4 inches
3/16 inch tubing diameter
Note: image shows plastic cap on bottom end of assembly to keep debris out, remove cap before installing part
DVOR-1493

$35.60


Add to Cart
Pilot Assembly, Single (SCB, FCB, CCB)


View Details
Pilot burner, Oven, natural gas or LP gas

Oven Pilot Burner, natural gas
For Wolf Commercial Equipment
Tube size 1/4"
CH, CHR, TYG (Challenger Ranges, Teppanyaki Griddles)
*Compatible with both TS and BASO safety gas valves
**Includes orifices for Natural Gas or LP Gas.
***Fits TYG Teppanyaki Griddles made after 9/1997.
DVOR-4269

$48.54


Add to Cart
Pilot burner, Oven, natural gas or LP gas


View Details
Pilot Tube with Head, Nut, Ferrule, 18 inch

3/16" Outside Diameter x 18" Length
For Wolf broiler and cheese melters
For Wolf griddle models 48 Hi Boy TG, Pro TG Combo
For Wolf ovens and ranges Commander model series F, FS, XF, XS

Wolf Challenger Ranges where applicable, Wolf Challenger and Regency Hot Plates where applicable
DVOR-1508

$24.50


Add to cart
Pilot Tube with Head, Nut, Ferrule, 18 inch


View Details
Pilot Valve (double)

For Wolf ranges, broilers and cheese melters
For Wolf griddles models Hi Boy TG, Husky HG, IRG, MTG, Pro TG, etc.

For Wolf ovens and ranges Challenger model series CH, CHSS, KCH, KCHSS, CHR, wherever applicable

1/8" MPT X 3/16" CCT (1/8" NPT x 3/16 CCT)
Dimensions: Width 1-1/4"
DVOR-1518

$16.80


Add to cart
Pilot Valve (double)


View Details
Pilot Valve (single)

1/8" (.3cm) NPT x 3/16"(.5cm) compression (for 3/16" tubing)
Brass Single Pilot Valve
For Wolf broilers and cheese melters
For Wolf ovens and ranges Challenger model series CH, CHSS, KCH, KCHSS, R

For Wolf Stock Pot Ranges (WSPR, SPR, VSP, WSPR2F, etc.)
DVOR-1509

$11.15


Add to cart
Pilot Valve (single)


View Details
Pilot Valve, Single straight inline brass, 1/8 x 1/4

Adjustable straight single inline brass pilot valve
(used with DVOR-1518 double pilot valve, etc)

1/8" NPT inlet x 1/4" outside diameter tubing outlet (1/8" MPT, 1/4" CCT)
DVOR-1515

$27.95


Add to Cart
Pilot Valve, Single straight inline brass, 1/8 x 1/4


View Details
Pilot, Oven pilot burner for Wolf Challenger, Snorkeler, etc.

For Models Wolf Range Challenger and Snorkeler CH/CHSS, AFS, CAF, KAFS, KCAF and many other models from both Wolf and Vulcan Hart
This part Includes both LP/Natural Gas Orifices
DVOR-1517

$49.50


Add to cart
Pilot, Oven pilot burner for Wolf Challenger, Snorkeler, etc.


View Details
Pressure Regulators (LP, Propane Gas, 3/4" NPT)

Pressure Regulator
For Liquid Propane Gas (LP/Propane)
3/4" NPT
Fits most Wolf Range commercial cooking equipment with 3/4" connection and Liquid Propane fuel type (LP)
DVOR-1637

$49.50


Add to cart
Pressure Regulators (LP, Propane Gas, 3/4


View Details
Pressure Regulators (Natural Gas, 1" NPT)

Pressure Regulator
For Natural Gas
1" NPT
DVOR-1631

$138.02


Add to cart
Pressure Regulators (Natural Gas, 1


View Details
Pressure Regulators (Natural Gas, 3/4" NPT)

Pressure Regulator
For Natural Gas
3/4" NPT
Fits most commercial Wolf Range cooking equipment with Natural Gas 3/4" connection
DVOR-1634

$49.50


Add to cart
Pressure Regulators (Natural Gas, 3/4


View Details
Rack guide assembly - Challenger XL - Convection Ovens - Left Hand

Rack guide assembly - Challenger XL - Convection Ovens - Left Hand
DVOR-GRCX-LH

$178.20


Please Call to Order or Use Order Form
Rack guide assembly - Challenger XL - Convection Ovens - Left Hand


View Details
Rack guide assembly - Challenger XL - Convection Ovens - Right Hand

Rack guide assembly - Challenger XL - Convection Ovens - Right Hand
DVOR-GRCX-RH

$178.20


Please Call to Order or Use Order Form
Rack guide assembly - Challenger XL - Convection Ovens - Right Hand


View Details
Rack guide for Challenger XL - standard ovens

Rack guide for Challenger XL - standard ovens
DVOR-GRSX

$34.80


Please Call to Order or Use Order Form
Rack guide for Challenger XL - standard ovens


View Details
Rear Burner Assembly for Challenger CHSSR/CHR (90's era)

Rear Burner Assembly for CHSSR/CHR (90's era, where applicable)
Complete assembly with air shutter.

(front burner assembly is part # DVOR-8023)
DVOR-3606

$139.81


Add to Cart
Rear Burner Assembly for Challenger CHSSR/CHR (90's era)


View Details
Rear Venturi, 17 inch, Challenger

Steel rear venturi for early series Wolf Challenger ranges with flashtube dual burner assemblies (see 1475, 1486)
Dimensions: 17" (approximately)
DVOR-9105

$159.00


Add to cart
Rear Venturi, 17 inch, Challenger


View Details
Safety Valve

Wolf Challenger ovens and ranges models CH, CHSS, early models (1980 and before, or wherever applicable)
Gas: 3/8" NPT
Pilot: 1/8" FMDA
DVOR-1612

$388.00


Add to cart
Safety Valve


View Details
Safety Valve (Challenger CH, CHSS, CHR, C, from 1990-1998)

Challenger models CH, CHSS, CHR, C23, C34, C45, C56, C68, etc.
Usually found on models made between 1990-1998, etc.
Older TYG Griddles (Wolf Teppanyaki)

1/4" NPT gas in/out
1/4" pilot in/out TS11J
*does not include thermocouple (uses DVOR-1618 thermocouple in most applications)
DVOR-1667

$179.00


Add to cart
Safety Valve (Challenger CH, CHSS, CHR, C, from 1990-1998)


View Details
Safety Valve (Electronic Ignition and/or Wolf Gourmet Series for Oven-Bake, R series)

Wolf Residential (Gourmet Series) Safety Valve.
• For Oven Bake: DVOR-1607
Used for models with electronic ignition. Note: Please provide stove model and serial number when ordering (if necessary).

*No image available at this time
DVOR-1607

$367.00


Add to cart
Safety Valve (Electronic Ignition and/or Wolf  Gourmet Series for Oven-Bake, R series)


View Details
Safety Valve (for some model C34S, etc.)

Safety Valve for model C34S, and other C series Challenger Ranges**.
1/4" FPT GAS IN/OUT, 1/8" FPT PILOT IN/OUT

BASO # H15QR-3, H15QR-4
Also used on other models from Wolf Range and Vulcan Hart.

**Some C34S models use different part: See part # DVOR-1644
DVOR-4981

$359.00


Add to cart
Safety Valve (for some model C34S, etc.)


View Details
Safety Valve (Wolf Challenger and Commander Series)

For Challenger models C, CH, CHSS (1980-89), and some C-series from late 90's and early 2000's

For Commander models F, FS, FV, XF, XS. Select TYG (teppanyaki) models.
3/8" NPT. Pilot 1/8". Baso H15AR-3,H15AR-3C,H15AR-3D

Uses DVOR-1618 thermocouple for Challenger Series Ranges, and DVOR-1630 for Commander Series Ranges.

NOTE: Previous version of this valve had thermocouple port on main axis of part near gas out, it is now on the side. This will not affect installation.
(See additional image of old style of this Safety Valve)
DVOR-1644

$259.00


Add to cart
Safety Valve (Wolf Challenger and Commander Series)


View Details
Safety Valve for C36S Challenger XL etc., TS style

Safety Valve for C36S Challenger XL etc., TS style, 7/16 gas with 1/4 pilot out-only
For Challenger XL or Vulcan Endurance equivalent
DVOR-1651

$223.48


Please Call to Order 1-877-386-7766
Safety Valve for C36S Challenger XL etc., TS style


View Details
Safety Valve for Right Hand Oven on Challenger XL double oven C60 models

Safety Valve for Right Hand Oven on select models (C60 Challenger XL series, V series Vulcan, W series Wolf)
No image available at this time.
DVOR-1681

$243.20


Please Call to Order 1-877-386-7766
Safety Valve for Right Hand Oven on Challenger XL double oven C60 models


View Details
Safety Valve, Kit (retrofit)

Replacement Safety valve with retrofit kit for certain Wolf C or CH series Challenger Ranges only.


**See special installation notes for retrofit at link below**
Technical Specifications:
Gas in-out NPT 1/4
Pilot in-out CCT 3/16
Gas in CCT 7/16

Installation Notes (PDF) »
DVOR-1649

$292.56


Add to Cart
Safety Valve, Kit (retrofit)


View Details
Safety Valve, Wolf Challenger XL Series

Safety Valve for Wolf Challenger XL Series Ranges
For Challenger XL series ranges or Endurance series ranges by Vulcan
BASO type valve.
Uses thermocouple DVOR-1618 or DVOR-8872
DVOR-1652

$298.30


Add to Cart
Safety Valve, Wolf Challenger XL Series


View Details
Safety Valve, Wolf/Vulcan

Safety Valve for model C34S, and other C series Challenger Ranges. Also for Vulcan models.
1/4" gas, 1/8" pilot
Includes fittings shown
DVOR-4982

$367.20


Add to Cart
Safety Valve, Wolf/Vulcan


View Details
Shutter, Air Mixer (F/1.25"OD)

Air Shutter
Dimensions: 1-1/4" Inner Diameter X 1.474" Long (with side slot only)

Burner replacement air mixer plate
For Wolf short order griddles, and Wolf oven Challenger Series
Wolf oven Challenger model series CH, CHSS, KCH,KCHSS, R.
WOLF Oven Series: AFS, CAF, F, FS, KAFS, KCAF, KF, KFS, XFS.
DVOR-1457

$15.80


Add to cart
Shutter, Air Mixer (F/1.25


View Details
Solenoid Gas (120V, 3/8")

Single Solenoid Gas Valve for Wolf ovens and ranges models CH, CHSS, KCH, KCHSS, K, K68D, etc.

Also compatible with IDR series (Imperial).
DVOR-1885

$156.40


Add to cart
Solenoid Gas (120V, 3/8


View Details
Solenoid Gas, NAT/LP (120V, 1/2")

For older Wolf Range Challenger CH, CHSS units using FM type safety valve
DVOR-1818

$156.40


Add to cart
Solenoid Gas, NAT/LP (120V, 1/2


View Details
Switch, Flame (SPST, 30" capillary)

Flame Switch for Wolf griddle model series IRG, SAE, SCE, TMM, etc.
For Wolf ovens and ranges models KCH, KCHSS (Challenger series), and more models.

*Replaced by part DVOR-1821
DVOR-1830

$  


See DVOR-1821
Switch, Flame (SPST, 30


View Details
Thermocouple for Safety Valve on Challenger XL ovens, 18", Heavy Duty

18" long capillary thermocouple for Wolf, Vulcan (Wolf Challenger Range models: XL)
DVOR-8872

$24.50


Add to cart
Thermocouple for Safety Valve on Challenger XL ovens, 18


View Details
Thermocouple for Safety Valve, 18" Capillary, Heavy Duty Ranges and Ovens

For Wolf Range Models CH, CHSS, C, etc.
Fits BASO and TS style gas safety valves
18" Capillary (copper tubing)
Installation Instructions (pdf)
DVOR-1618

$18.00


Add to cart
Thermocouple for Safety Valve, 18


View Details
Thermocouple, 36", Heavy Duty (For Challenger, Commander, W series, V series, or TYG, etc.)

36" long capillary thermocouple for Wolf Range Cooking Equipment

Fits Wolf Commander Series (F, FS, etc.), Wolf Teppanyaki Griddles model (TYG, etc.)
DVOR-1617

$33.00


Add to cart
Thermocouple, 36


View Details
Thermostat (175° - 500° , KX, 36 inch capillary)

Thermostat (175° - 500°, KX, 36" Capillary)

Dial Sold Separately (Dial is part # DVOR-1524)

Wolf ovens and ranges Challenger model series KCH, KCHSS, Commander model series KF, KFS, JFXP, KFXPS, XCH, XFS, Air Flow Crusader convection oven models AFS, CAF, KAFS, KCAF

For Challenger Range models with electronic ignition and/or convection oven cavity (K-series Challenger model, K68, K56, K45, K34, etc.)

Also used on early series Wolf Range A series residential ranges, on units without oven-broiler setting.
DVOR-1561

$239.00


Add to cart
Thermostat (175° - 500° , KX, 36 inch capillary)


View Details
Thermostat Dial (BJ)

For Wolf BJ Thermostat
2" Diameter dial

For: Challenger CH, CHSS, etc. Commander F, FS, etc.
Also compatible with: Wolf Grill Hi Boy, MTG, PRO series with suffix TG or STG
Mounts 4 ways
DVOR-1560

$41.50


Add to cart
Thermostat Dial (BJ)


View Details
Thermostat Dial (KX style oven knob)

Wolf ovens and ranges Challenger model series KCH, KCHSS
Commander model series KF, KFS, JFXP, KFXPS, XCH, XFS
Air Flow Crusader convection oven models AFS, CAF, KAFS, KCAF
Wolf Gourmet A series (Residential).

Used with Wolf Range thermostats (Wolf Challenger commercial series electronic ignition model thermostat is part # DVOR-1561)
DVOR-1524

$16.50


Add to cart
Thermostat Dial (KX style oven knob)


View Details
Thermostat Dial for oven thermostat

Knob (dial) kit for Wolf Thermostat on Challenger series, etc
DVOR-2988

$20.54


Add to cart
Thermostat Dial for oven thermostat


View Details
Thermostat Dial for oven thermostat

Replacement Knob (dial)kit for Wolf Thermostat DVOR-1523 or DVOR-1526 on Challenger Series, etc.
DVOR-4511

$32.50


Add to cart
Thermostat Dial for oven thermostat


View Details
Thermostat Dial with 5/8 inch long protrusion for Challenger CHR series

Oven Thermostat Dial
BJWA Thermostat Replacement Dial Kit
5/8" length protrusion on back

Use with Thermostat DVOR-1523 For Wolf Challenger Commercial Range models series CHR, CHSSR, KCHSSR, etc.
Protrusion on back is 5/8" long with notch facing down

(Note: see similar part # DVOR-1520 for dial with the notch on protrusion facing up)
DVOR-1525

$32.50


Add to cart
Thermostat Dial with 5/8 inch long protrusion for Challenger CHR series


View Details
Thermostat Dial with 5/8" long protrusion on back for Challenger CHSS series

BJWA Thermostat Replacement Dial
4 position D Stem Type, BJWA dial kit
5/8" long stem protrusion on back
For models CH, CHSS, KCHSS, etc.
Compatible with thermostat part # DVOR-1568
DVOR-1520

$32.50


Add to cart
Thermostat Dial with 5/8


View Details
Thermostat for Fryer (200-400 deg. F)

Fryer thermostat (GS). For Commander, Challenger, WTF-42, etc.
DVOR-1593

$211.00


Order Now
Thermostat for Fryer (200-400 deg. F)


View Details
Thermostat, Challenger XL ovens, switch style

Thermostat, Challenger XL ovens, switch style
includes new fasteners
Uses dial DVOR-3861 for convection models
DVOR-5100

$203.52


Add to Cart
Thermostat, Challenger XL ovens, switch style


View Details
Thermostat, Oven (Challenger CHR series, etc.)

Replacement Oven Thermostat Kit with 48" capillary, for CHR model Challenger ranges with inverted thermostat mount, or similar Challenger models where applicable (Note: see thermostat # DVOR-1568 for CH/CHSS/CHR models with regular mount orientation for oven themostat)

Kit will replace Wolf Range Challenger Series BJ and BJWA commercial thermostat installations, includes dial.
Oven thermostat kit
1/4" (.6cm) NPT
250° to 550°F (dial is fahrenheit) temperature range
DVOR-1523

$239.60


Add to cart
Thermostat, Oven (Challenger CHR series, etc.)


View Details
Thermostat, Oven or Griddle Top Range (36" capillary)

Now sold as a complete kit!

150° to 400°F - HI (65.5° to 204.4°C) temperature range.
1/4" (.6cm) NPT outlet
36" (91.4cm) capillary length
3/16" x 8" (.5cm x 20.3cm) body
For Wolf griddle models Hi Boy TG, Pro TG, STG, GG,RTG, MTG
For Wolf ovens and ranges Commander model series F,FS, XF, XS
For Wolf ovens and ranges Challenger model series CH, CHSS, KCH, KCHSS, R (Challenger R series commercial units only)
*Uses dial #DVOR-1560 (included in this kit version)
DVOR-1519

$233.00


Add to cart
Thermostat, Oven or Griddle Top Range (36


View Details
Thermostat: Oven Thermostat (Wolf Challenger CH, CHSS, CHR, etc)

Temperature Range: low-500 degrees fahrenheit.
Wolf Challenger ovens and ranges models CH, CHSS, CHR (some CHR series use DVOR-1523), etc.
48" capillary.
Commercial BJ series thermostat.
Dial Sold Separately »


View Thermostat Adjustment/Calibration Directions
View Oven Test Thermometer

Thermostat Installation Instructions (pdf)
DVOR-1568

$269.00


Add to cart
Thermostat: Oven Thermostat (Wolf Challenger CH, CHSS, CHR, etc)


View Details
Toggle Switch, Challenger, Commander Series, etc. (Fan on/off switch)

Toggle Switch, Fan Off and On switch on Snorkeler models (convection "K" prefix)
Commander Series by Wolf
Challenger Series with Convection by Wolf, KCH series, KCHSS, etc.
DVOR-1825

$44.80


Add to Cart
Toggle Switch, Challenger, Commander Series, etc. (Fan on/off switch)


View Details
Top Burner Valve with angled inlet

Fits some Wolf ovens and ranges Challenger models in series CH, CHR, CHSS, C23, KCH, KCHSS (note: this valve is Not push-to-turn style)

See older version of part in second image shown.
DVOR-1597

$96.50


Add to cart
Top Burner Valve with angled inlet


View Details
Valve with Orifice, Gas Burner (Challenger, Challenger XL, charbroilers, griddles, etc.)

Replacement burner valve for Challenger XL series ranges by Wolf
Also compatible with Challenger series C, CH, CHR, CHSS, etc. (1992 and later)

Also compatible with Wolf Series: CT, AHP, SCB, ACB, CMJ, TYG griddles, RM, RHP, NP (Newport Series) and more (where and when applicable, see serial # or visual confirmation).
Technical Information:
1/8" NPT (gas in)
Orifice included, as shown (Natural Gas orifice)
Not Push to turn.

DVOR-XVLV

$49.50


Add to Cart
Valve with Orifice, Gas Burner (Challenger, Challenger XL, charbroilers, griddles, etc.)


View Details
Valve, for Wolf Challenger XL griddle, late series ACB, AGM griddles, charbroilers, etc.

Top burner Valve, for Wolf Challenger XL griddle sections, AGM griddles, late series ACB char broilers, etc. (where applicable)

Also used on Wolf and Vulcan Griddle Sections (later models where applicable. e.g.: W or V series)

Please contact us for assistance: 1-877-386-7766 or 415-332-5840
DVOR-1408

$48.19


Add to Cart
Valve, for Wolf Challenger XL griddle, late series ACB, AGM griddles, charbroilers, etc.


View Details
Valve, Gas Burner (Challenger, Challenger XL, AGM, ranges, charbroilers, griddles, etc.)

Replacement burner valve for Challenger XL series ranges by Wolf
Also compatible with Challenger series C, CH, CHR, CHSS, etc. (1992 and later)

Also compatible with Wolf Series: CT, AHP, SCB, ACB, CMJ, TYG griddles, AGM, RM, RHP, NP (Newport Series) and more (where applicable).
Technical Information:
1/8" NPT (gas in)
Not Push to turn.

DVOR-SVLV

$39.50


Add to Cart
Valve, Gas Burner (Challenger, Challenger XL, AGM, ranges, charbroilers, griddles, etc.)


View Details
Wolf Logo Emblem

Replacement Emblem for Oven Door
Large (3.5" W x 4.5" H)
DVOR-LOGO3

$69.12


Add to cart
Wolf Logo Emblem


View Details
Wolf Logo Emblem (Challenger XL)

Replacement emblem/badge.
Latest style logo for Wolf Challenger XL series

Dimensions (inches): 6-3/4" x 1-3/4"
DVOR-WLFXL

$69.12


Add to cart
Wolf Logo Emblem (Challenger XL)


View Details
Wolf Logo Emblem (older style)

(Old Style) Small (2"W x 3"H)
DVOR719

$69.12


Add to cart
Wolf Logo Emblem (older style)


View Details


 View All Parts By Part Name »             View All Parts By Part Number »             View Shopping Cart Contents


View Cart Contents   Wolf Range Replacement Parts Index & Resources   Dvorson's Home